| 2024-03 |
Low concentration zinc oxide nanoparticles enrichment enhances bacterial and pro-inflammatory resistance of calcium silicate-based cements |
Journal of the Mechanical Behavior of Biomedical Materials
|
| 2024-02 |
Thermophysical properties and bonding with composite resin of premixed mineral trioxide aggregate for use as base material |
Dental Materials Journal
|
| 2023-12 |
Quantitative light-induced fluorescence enables effective detection of orthodontic adhesive residues in diverse environments |
Photodiagnosis and Photodynamic Therapy
|
| 2023-11 |
Occlusive membranes for guided regeneration of inflamed tissue defects |
Nature Communications
|
| 2023-11 |
Dimensional accuracy, mechanical property, and optical stability of zirconia orthodontic bracket according to yttria proportions |
Scientific Reports
|
| 2023-10 |
Mechanical properties and sustainable bacterial resistance effect of strontium-modified phosphate-based glass microfiller in dental composite resins |
Scientific Reports
|
| 2023-10 |
A novel orthodontic adhesive containing zinc-doped phosphate-based glass for preventing white spot lesions |
Journal of Dentistry
|
| 2023-09 |
Effect of strontium substitution on functional activity of phosphate-based glass |
Biomaterials Science
|
| 2023-08 |
Oral Porphyromonas gingivalis infection affects intestinal microbiota and promotes atherosclerosis |
Journal of Clinical Periodontology
|
| 2023-07 |
Dental students' perception of their educational environment in relation to their satisfaction with dentistry major: a cross-sectional study |
BMC medical education
|
| 2023-05 |
Dental Materials Applied to 3D and 4D Printing Technologies: A Review |
Polymers
|
| 2023-05 |
Cerium oxide nanozymes confer a cytoprotective and bio-friendly surface micro-environment to methacrylate based oro-facial prostheses |
Biomaterials
|
| 2023-04 |
Antibacterial and Physicochemical Properties of Orthodontic Resin Cement Containing ZnO-Loaded Halloysite Nanotubes |
Polymers
|
| 2023-04 |
Multistability and hysteresis in states of oral microbiota: Is it impacting the dental clinical cohort studies? |
Journal of Periodontal Research
|
| 2023-03 |
Novel antibacterial and apatite forming restorative composite resin incorporated with hydrated calcium silicate |
Biomaterials Research
|
| 2023-03 |
Effect of bacterial resistant zwitterionic derivative incorporation on the physical properties of resin‑modified glass ionomer luting cement |
Scientific Reports
|
| 2023-02 |
Changes in mechanical and bacterial properties of denture base resin following nanoceria incorporation with and without SBA-15 carriers |
Journal of the Mechanical Behavior of Biomedical Materials
|
| 2023-01 |
Comparative assessment of marginal and internal gaps of cast-free monolithic zirconia crowns fabricated from 2 intraoral scanners: A prospective, double-blind, randomized clinical trial |
JOURNAL OF PROSTHETIC DENTISTRY
|
| 2023-01 |
Polybetaine-enhanced hybrid ionomer cement shows improved total biological effect with bacterial resistance and cellular stimulation |
Biomaterials Science
|
| 2022-12 |
치과재료의 피부 감작성 평가를 위한 용출 시험 및 용출물 분석 |
Journal of Alternatives to Animal Experiments
|
| 2022-12 |
은 나노 입자가 도핑된 실리카 함유 치과용 레진의 가시광선 조사에 따른 항균성 |
대한치과재료학회지
|
| 2022-12 |
다양한 고속 공기터빈 핸드피스에 장착 된 Zero Suck-back Control Box (ZSCB)의외부 오염물질 흡인 방지 효과 |
대한치과재료학회지
|
| 2022-11 |
Accuracy and stability of computer-aided customized lingual fixed retainer: a pilot study |
Progress in Orthodontics
|
| 2022-11 |
Double-Action Disinfection with Silk Fibroin Gauze: Reliable Therapeutics to Prevent Infectious Complications |
ACS Materials Letters
|
| 2022-11 |
Zinc‑modified phosphate‑based glass micro‑filler improves Candida albicans resistance of auto‑polymerized acrylic resin without altering mechanical performance |
Scientific Reports
|
| 2022-10 |
Regulation of the Inevitable Water-Responsivity of Silk Fibroin Biopolymer by Polar Amino Acid Activation |
ACS Nano
|
| 2022-10 |
북한이탈주민의 구강보건서비스 경험이 구강건강관리행태에 미치는 영향 |
대한구강보건학회지
|
| 2022-10 |
Novel Osteogenic and Easily Handled Endodontic Calcium Silicate Cement Using Pluronic F127 Hydrogel |
Materials
|
| 2022-08 |
Effects of incorporating 45S5 bioactive glass into 30% hydrogen peroxide solution on whitening efficacy and enamel surface properties |
CLINICAL ORAL INVESTIGATIONS
|
| 2022-08 |
Acid neutralizing and remineralizing orthodontic adhesive containing hydrated calcium silicate |
JOURNAL OF DENTISTRY
|
| 2022-05 |
캡슐형 치과용 아말감의 보관 온도에 따른 수은 증기 누출에 관한 연구 |
대한치과의사협회지
|
| 2022-05 |
Molecular weight tuning optimizes poly(2- methoxyethyl acrylate) dispersion to enhance the aging resistance and anti-fouling behavior of denture base resin |
Biomaterials Science
|
| 2022-04 |
Evaluation of the time-dependent efficacy of commercial denture or orthodontic appliance cleansers: An in vitro study |
DENTAL MATERIALS JOURNAL
|
| 2022-03 |
Stress Dissipation Encoded Silk Fibroin Electrode for the Athlete-Beneficial Silk Bioelectronics |
Advanced Science
|
| 2022-03 |
A Systematic Review and Network Meta-Analysis of Biomedical Mg Alloy and Surface Coatings in Orthopedic Application |
Bioinorganic Chemistry and Applications
|
| 2022-03 |
Multivalent network modifier upregulates bioactivity of multispecies biofilm-resistant polyalkenoate cement |
Bioactive Materials
|
| 2022-02 |
Cytotoxicity, Colour Stability and Dimensional Accuracy of 3D Printing Resin with Three Different Photoinitiators |
POLYMERS
|
| 2022-02 |
Effects of 35% hydrogen peroxide solution containing hydrated calcium silicate on enamel surface |
CLINICAL ORAL INVESTIGATIONS
|
| 2022-01 |
Release of bisphenol a from pit and fissure sealants according to different pH conditions |
POLYMERS
|
| 2021-12 |
저온열화가 치과 CAD/CAM용 다층 지르코니아 블록의 특성에 미치는 영향 |
대한치과재료학회지
|
| 2021-12 |
세 가지 용액에 의한 기혼합형 MTA의 기계 및 물리·화학적 특성 연구 |
대한치과재료학회지
|
| 2021-12 |
Cytokine Release from Organotypic Human Oral Tissue Following Exposure to Oral Care Product Chemicals |
대한치의학회 영문학회지
|
| 2021-11 |
Evaluating the three-dimensional printing accuracy of partial-arch models according to outer wall thickness: an in vitro study |
MATERIALS
|
| 2021-10 |
Evaluation of Dimensional Changes According to Aging Period and Postcuring Time of 3D-Printed Denture Base Prostheses: An In Vitro Study |
MATERIALS
|
| 2021-10 |
Effect of online learning for dental education in asia during the pandemic of COVID-19 |
JOURNAL OF DENTAL SCIENCES
|
| 2021-09 |
Multiple porous synthetic bone graft comprising engineeredmicro-channel for drug carrier and bone regeneration |
MATERIALS
|
| 2021-08 |
Enamel Demineralization Resistance and Remineralization by Various Fluoride-Releasing Dental Restorative Materials |
MATERIALS
|
| 2021-07 |
Improvement of the mechanical and biological properties of bioactive glasses by the addition of zirconium oxide (ZrO 2 ) as a synthetic bone graft substitute |
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
|
| 2021-06 |
골이식재 분해산물 확인 및 정량 시험의 의료기기 GLP 적용 |
대한치과재료학회지
|
| 2021-06 |
치주 조직 재생을 위한 3D 프린터로 제작된 흡수성 차폐막의 물리적 및 생분해성 특성 |
대한치과재료학회지
|
| 2021-04 |
Physical, chemical, mechanical, and biological properties of four different commercial root-end filling materials: A comparative study |
MATERIALS
|
| 2021-04 |
Osseointegration of Plasma Jet Treated Titanium Implant Surface in an Animal Model |
MATERIALS
|
| 2021-03 |
Reverse Actuation of Polyelectrolyte Effect for In Vivo Antifouling |
ACS NANO
|
| 2021-02 |
Mechanical properties and wear resistance of commercial stainless steel used in dental instruments |
MATERIALS
|
| 2021-02 |
Time-dependent effects after enamel fluoride application on an acid etching system in orthodontic bracket bonding |
CLINICAL ORAL INVESTIGATIONS
|
| 2021-02 |
Evaluation of success rate and biomechanical stability of ultravioletphotofunctionalized miniscrews with short lengths |
AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS
|
| 2021-01 |
Guidelines for innovation in dental education during the coronavirus disease 2019 pandemic |
JOURNAL OF ORAL SCIENCE
|
| 2021-01 |
Scanning Accuracy of Bracket Features and Slot Base Angle in Different Bracket Materials by Four Intraoral Scanners: An In Vitro Study |
MATERIALS
|
| 2021-01 |
Durable Oral Biofilm Resistance of 3D-Printed Dental Base Polymers Containing Zwitterionic Materials |
International Journal of Molecular Sciences
|
| 2020-12 |
Effects of Intrabony Length and Cortical Bone Density on the Primary Stability of Orthodontic Miniscrews |
MATERIALS
|
| 2020-12 |
Bioresorbable magnesium-reinforced PLA membrane for guided bone/tissue regeneration |
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
|
| 2020-12 |
Enhancement of antibacterial and wettability performances of polyvinyl alcohol/chitosan film using non-thermal atmospheric pressure plasma |
APPLIED SURFACE SCIENCE
|
| 2020-11 |
Bio-Interactive Zwitterionic Dental Biomaterials for Improving Biofilm Resistance: Characteristics and Applications |
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
|
| 2020-11 |
Osteogenic properties of novel methylsulfonylmethane-coated hydroxyapatite scaffold |
International Journal of Molecular Sciences
|
| 2020-11 |
Development of a Bioactive Flowable Resin Composite Containing a Zinc-Doped Phosphate-Based Glass |
NANOMATERIALS
|
| 2020-10 |
In situ plasma-assisted synthesis of polydopamine-functionalized gold nanoparticles for biomedical applications |
GREEN CHEMISTRY
|
| 2020-10 |
Primary Stability of Orthodontic Titanium Miniscrews due to Cortical Bone Density and Re‐Insertion |
MATERIALS
|
| 2020-10 |
Changes in tribological and antibacterial properties of poly(methyl methacrylate)-based 3D-printed intra-oral appliances by incorporating nanodiamonds |
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
|
| 2020-08 |
Enhanced Osteogenic Differentiation of Human Mesenchymal Stem Cells on Amine-Functionalized Titanium Using Humidified Ammonia Supplied Nonthermal Atmospheric Pressure Plasma |
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
|
| 2020-08 |
Resin-Based Sealant with Bioactive Glass and Zwitterionic Material for Remineralisation and Multi-Species Biofilm Inhibition |
NANOMATERIALS
|
| 2020-08 |
Ladder-like polysilsesquioxanes with antibacterial chains and durable siloxane networks |
CHEMICAL ENGINEERING JOURNAL
|
| 2020-07 |
Improvement in the Microbial Resistance of Resin-Based Dental Sealant by Sulfobetaine Methacrylate Incorporation |
POLYMERS
|
| 2020-06 |
Antibacterial and Osteogenic Activity of Titania Nanotubes Modified with Electrospray-Deposited Tetracycline Nanoparticles |
NANOMATERIALS
|
| 2020-06 |
Boron nitride nanoplatelets as reinforcement material for dental ceramics |
DENTAL MATERIALS
|
| 2020-06 |
Incorporation of carboxybetaine methacrylate into poly(methyl methacrylate) to prevent multi-species biofilm formation |
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
|
| 2020-05 |
Prevention of Secondary Caries Using Resin‐Based Pit and Fissure Sealants Containing Hydrated Calcium Silicate |
POLYMERS
|
| 2020-04 |
Incorporating Aminated Nanodiamonds to Improve the Mechanical Properties of 3D-Printed Resin-Based Biomedical Appliances |
NANOMATERIALS
|
| 2020-04 |
Adhesion between Epoxy Resin-Based Fiber Post and Dental Core Resin Improved by Non-Thermal Atmospheric Pressure Plasma |
APPLIED SCIENCES-BASEL
|
| 2020-04 |
Enhanced mechanical properties of ZrO<inf>2</inf>-Al<inf>2</inf>O<inf>3</inf> dental ceramic composites by altering Al<inf>2</inf>O<inf>3</inf> form |
DENTAL MATERIALS
|
| 2020-04 |
Organosilicate compound filler to increase the mechanical strength of superhydrophilic layer-by-layer assembled film |
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
|
| 2020-03 |
치아매니큐어의 효력 및 물리·화학적 특성 연구 |
대한치과재료학회지
|
| 2020-02 |
Quantitative Interpretation of Hydration Dynamics Enabled the Fabrication of a Zwitterionic Antifouling Surface |
ACS APPLIED MATERIALS & INTERFACES
|
| 2020-01 |
Novel Dental Poly (Methyl Methacrylate) Containing Phytoncide for Antifungal Effect and Inhibition of Oral Multispecies Biofilm |
MATERIALS
|
| 2019-12 |
Incorporation of zwitterionic materials into light-curable fluoride varnish for biofilm inhibition and caries prevention |
SCIENTIFIC REPORTS
|
| 2019-12 |
Effect of wet storage on the bioactivity of ultraviolet light- and non-thermal atmospheric pressure plasma-treated titanium and zirconia implant surfaces |
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS
|
| 2019-11 |
In vitro Effects of Cyclic Dislodgement on Retentive Properties of Various Titanium-Based Dental Implant Overdentures Attachment System |
MATERIALS
|
| 2019-11 |
Effects of a Non-Thermal Atmospheric Pressure Plasma Jet with Different Gas Sources and Modes of Treatment on the Fate of Human Mesenchymal Stem Cells |
APPLIED SCIENCES-BASEL
|
| 2019-10 |
Novel Poly(Methyl Methacrylate) Containing Nanodiamond to Improve the Mechanical Properties and Fungal Resistance |
MATERIALS
|
| 2019-09 |
Bioactive resin-based composite with surface pre-reacted glass-ionomer filler and zwitterionic material to prevent the formation of multi-species biofilm |
DENTAL MATERIALS
|
| 2019-08 |
피톤치드를 함유한 복합레진의 기계적 특성 및 Streptococcus mutans 에 대한 항균 효과 |
한국치위생학회지(Journal of Korean society of Dental Hygiene)
|
| 2019-07 |
Surface modification of PVA thin film by nonthermal atmospheric pressure plasma for antifogging property |
AIP ADVANCES
|
| 2019-05 |
Comparing Properties of Variable Pore-Sized 3D-Printed PLA Membrane with Conventional PLA Membrane for Guided Bone/Tissue Regeneration |
MATERIALS
|
| 2019-03 |
임시치관용레진 타입에 따른 색안정성, 기계적 및 화학적 특성 비교 |
대한치과재료학회지
|