| 2024-03 |
Fully bioresorbable hybrid opto-electronic neural implant system for simultaneous electrophysiological recording and optogenetic stimulation |
Nature Communications
|
| 2024-01 |
Externally motionless triboelectric nanogenerator based on vortex-induced rolling for omnidirectional wind energy harvesting |
Nano Energy
|
| 2023-11 |
Breathing sounds analysis system for early detection of airway problems in patients with a tracheostomy tube |
Scientific Reports
|
| 2023-10 |
Neural probe integrated with low-impedance electrodes implemented using vertically aligned carbon nanotubes for three-dimensional mapping of neural signals |
Sensors and Actuators, B: Chemical
|
| 2023-09 |
Eye-Mimicked Neural Network Composed of Photosensitive Neural Spheroids with Human Opsin Proteins |
Advanced Materials
|
| 2023-07 |
High-Temperature-Operable Electromechanical Computing Units Enabled by Aligned Carbon Nanotube Arrays |
ACS Nano
|
| 2023-06 |
Mechanically resilient, alumina-reinforced carbon nanotube arrays for in-plane shock absorption in micromechanical devices |
Microsystems & Nanoengineering
|
| 2023-03 |
3D engineered tissue models for studying human-specific infectious viral diseases |
Bioactive Materials
|
| 2023-03 |
A 0.5-ms 47.5-nJ Resistor-to-Digital Converter for Resistive BTEX Sensor Achieving 0.1-to-5 ppb Resolution |
IEEE Journal of Solid-State Circuits
|
| 2023-02 |
Formation of Sub-100 nm Suspended Nanowire with Various Materials Using Thermally Adjusted Electrospun Nanofiber as Template |
Microsystems & Nanoengineering
|
| 2022-11 |
Curved flap array-based triboelectric self-powered sensor for omnidirectional monitoring of wind speed and direction |
Nano Energy
|
| 2022-10 |
Cylindrical Shell and Metal Wire-Based Omnidirectional Wind-Driven Triboelectric Nanogenerator [원통형 쉘 및 금속 와이어 기반의 전방향 풍력 구동 마찰전기 나노 발전기] |
Journal of the Korean Society for Precision Engineering
|
| 2022-09 |
Dual-Scale Porous Composite for Tactile Sensor with High Sensitivity over an Ultrawide Sensing Range |
Small
|
| 2022-07 |
Three-Dimensional Axotomy and Regeneration on Open-Access Microfluidic Platform |
IEEE TRANSACTIONS ON NANOBIOSCIENCE
|
| 2022-06 |
Self-suspended shell-based triboelectric nanogenerator for omnidirectional wind-energy harvesting |
NANO ENERGY
|
| 2022-04 |
Ethanol-sensing properties of cobalt porphyrin-functionalized titanium dioxide nanoparticles as chemiresistive materials that are integrated into a low power microheater |
Micro and Nano Systems Letters
|
| 2022-03 |
Toluene sensing characteristics of tin oxide-based gas sensor deposited with various amounts of metalloporphyrin |
Micro and Nano Systems Letters
|
| 2022-02 |
All Paper-Based, Multilayered, Inkjet-Printed Tactile Sensor in Wide Pressure Detection Range with High Sensitivity |
Advanced Materials Technologies
|
| 2022-01 |
Atomic layer deposited Pt nanoparticles on functionalized MoS2 as highly sensitive H2 sensor |
APPLIED SURFACE SCIENCE
|
| 2022-01 |
Frequency up-conversion hybrid energy harvester combining piezoelectric and electromagnetic transduction mechanisms |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
|
| 2021-12 |
Effect of carbon nanomaterial dimension on the functional activity and degeneration of neurons |
BIOMATERIALS
|
| 2021-12 |
Highly Sensitive Flexible Tactile Sensors in Wide Sensing Range Enabled by Hierarchical Topography of Biaxially Strained and Capillary-Densified Carbon Nanotube Bundles |
SMALL
|
| 2021-11 |
Recent Progress in Flexible Tactile Sensors for Human-Interactive Systems: From Sensors to Advanced Applications |
ADVANCED MATERIALS
|
| 2021-09 |
Engineered neural circuits for modeling brain physiology and neuropathology |
ACTA BIOMATERIALIA
|
| 2021-06 |
Location-specific fabrication of suspended nanowires using electrospun fibers on designed microstructure |
NANOTECHNOLOGY
|
| 2021-05 |
Fabrication of Fine-Pored Polydimethylsiloxane using Isopropyl Alcohol and Water Mixture for Adjustable Mechanical, Optical, and Thermal Properties |
RSC ADVANCES
|
| 2021-04 |
Integration of Gold Nanoparticle–Carbon Nanotube Composite for Enhanced Contact Lifetime of Microelectromechanical Switches with Very Low Contact Resistance |
ACS APPLIED MATERIALS & INTERFACES
|
| 2021-03 |
Large-Area, Crosstalk-Free, Flexible Tactile Sensor Matrix Pixelated by Mesh Layers |
ACS APPLIED MATERIALS & INTERFACES
|
| 2020-11 |
Patterned Carbon Nanotube Bundles as Stretchable Strain Sensors for Human Motion Detection |
ACS APPLIED NANO MATERIALS
|
| 2020-11 |
Detection of volatile organic compounds based on low-energy electron scattering according to difference in collisional cross-section |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2020-06 |
Carbon-doped WO3 nanostructure based on CNT sacrificial template and its application to highly sensitive NO2 sensor |
IEEE SENSORS JOURNAL
|
| 2020-05 |
All-textile wearable triboelectric generator using pile-embroidered fibers for enhancing output power |
SMART MATERIALS AND STRUCTURES
|
| 2020-03 |
Highly Sensitive Detection of Benzene, Toluene, and Xylene Based on CoPP-Functionalized TiO2 Nanoparticles with Low Power Consumption |
ACS Sensors
|
| 2019-12 |
A Novel Conductive and Micropatterned PEG-Based Hydrogel Enabling the Topographical and Electrical Stimulation of Myoblasts |
ACS APPLIED MATERIALS & INTERFACES
|
| 2019-12 |
Detection of Mixed BTEX With Suppressed Reaction Specificity Using Tin Oxide Nanoparticles Functionalized by Multi-Metalloporphyrins |
IEEE SENSORS JOURNAL
|
| 2019-08 |
Flexible Energy Harvester with Piezoelectric and Thermoelectric Hybrid Mechanisms for Sustainable Harvesting |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
|
| 2019-08 |
Multi-layered, hierarchical fabric-based tactile sensors with high sensitivity and linearity in ultrawide pressure range |
ADVANCED FUNCTIONAL MATERIALS
|
| 2019-08 |
Light-assisted Recovery of Reacted MoS2 for Reversible NO2 Sensing at Room Temperature |
NANOTECHNOLOGY
|
| 2019-07 |
Humidity-resistant triboelectric energy harvester using electrospun PVDF/PU nanofibers for flexibility and air permeability |
NANOTECHNOLOGY
|
| 2019-06 |
Impact Ionization Induced by Accelerated Photoelectrons for Wide-Range and Highly Sensitive Detection of Volatile Organic Compounds at Room Temperature |
ACS APPLIED MATERIALS & INTERFACES
|
| 2019-06 |
Sensitivity enhancement in photoionization detector using microelectrodes with integrated 1D nanostructures |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2019-05 |
Polymer-based flexible and multi-directional tactile sensor with multiple NiCr piezoresistors |
Micro and Nano Systems Letters
|
| 2019-05 |
Integration of Carbon Nanotube Network on Microelectromechanical Switch for Ultralong Contact Lifetime |
ACS APPLIED MATERIALS & INTERFACES
|
| 2019-05 |
Improved photo- and chemical-responses of graphene via porphyrin-functionalization for flexible, transparent, and sensitive sensors |
NANOTECHNOLOGY
|
| 2019-04 |
Fabrication of suspended nanowires for highly sensitive gas sensing |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2019-03 |
Ultrasensitive Strain Sensor Based on Separation of Overlapped Carbon Nanotubes |
SMALL
|
| 2019-02 |
A Fully Transparent, Flexible, Sensitive, and Visible-Blind Ultraviolet Sensor Based on Carbon Nanotube-Graphene Hybrid |
ADVANCED ELECTRONIC MATERIALS
|
| 2018-11 |
Fabrication and Characterization of VOC Sensor Array Based on SnO2 and ZnO nanoparticles functionalized by metalloporphyrins |
Micro and Nano Systems Letters
|
| 2018-09 |
입체 자수 기법을 적용한 마찰 에너지 수확 증대형 직물 구조의 탐색 |
감성과학
|
| 2018-07 |
Simple fabrication method of silicon/tungsten oxide nanowires heterojunction for NO2 gas sensors |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2018-07 |
Humidity-Resistant, Fabric-Based, Wearable Triboelectric Energy Harvester by Treatment of Hydrophobic Self-Assembled Monolayers |
Advanced Materials Technologies
|
| 2018-07 |
Suspended CoPP-ZnO nanorods integrated with micro-heaters for highly sensitive VOC detection |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2018-01 |
Flexible and multi-directional piezoelectric energy harvester for self-powered human motion sensor |
SMART MATERIALS AND STRUCTURES
|
| 2018-01 |
Flexible, Transparent, Sensitive, and Crosstalk-Free Capacitive Tactile Sensor Array Based on Graphene Electrodes and Air Dielectric |
ADVANCED ELECTRONIC MATERIALS
|
| 2018-01 |
Multidirectional flexible force sensors based on confined, self-adjusting carbon nanotube arrays |
NANOTECHNOLOGY
|
| 2017-11 |
Micromachined resonant frequency tuning unit for torsional resonator |
MICROMACHINES
|
| 2017-10 |
MoS2 gas sensor functionalized by Pd for the detection of hydrogen |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2017-07 |
Heterogeneous integration of carbon-nanotube-graphene for high-performance, flexible, and transparent photodetectors |
SMALL
|
| 2017-02 |
Development of MEMS Multi-Mode Electrostatic Energy Harvester Based on SOI process |
MICROMACHINES
|
| 2017-01 |
Fabrication and Characterization of Monolithic Piezoresistive High-g Three-axis Accelerometer |
Micro and Nano Systems Letters
|
| 2016-09 |
Improvement of Gas-Sensing Performance of Large-Area Tungsten Disulfide Nanosheets by Surface Functionalization |
ACS NANO
|
| 2016-04 |
A Highly Sensitive Flexible Strain Sensor Based on Contact Resistance Change of Carbon Nanotube Bundles |
NANOTECHNOLOGY
|
| 2015-12 |
Low-Temperature Selective Growth of Tungsten Oxide Nanowires by Controlled Nanoscale Stress Induction |
SCIENTIFIC REPORTS
|
| 2015-09 |
Defective Carbon Nanotube-Silicon Heterojunctions for Photodetector and Chemical Sensor with Improved Responses |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
| 2015-07 |
Molecularly Engineered Surface Triboelectric Nanogenerator by Self-Assembled Monolayers (METS) |
CHEMISTRY OF MATERIALS
|
| 2015-04 |
A High Efficiency DC-DC Boost Converter for a Miniaturized Microbial Fuel Cell |
IEEE TRANSACTIONS ON POWER ELECTRONICS
|
| 2015-02 |
A highly sensitive hydrogen sensor with gas selectivity using a PMMA membrane-coated Pd nanoparticle/single-layer graphene hybrid |
ACS APPLIED MATERIALS & INTERFACES
|
| 2015-02 |
Widely Tunable Variable Capacitor with Switching and Latching Mechanisms |
IEEE ELECTRON DEVICE LETTERS
|
| 2015-02 |
Development and performance test of a ZnO nanowire charger for measurements of nano-aerosol particles |
SENSORS AND ACTUATORS A-PHYSICAL
|
| 2015-01 |
A high power density miniaturized microbial fuel cell having carbon nanotube anodes |
JOURNAL OF POWER SOURCES
|
| 2014-12 |
Resonant-frequency tuning of angular vertical comb-driven microscanner |
Micro and Nano Systems Letters
|
| 2014-09 |
Acid-sensitive pH sensor using electrolysis and a microfluidic channel for read-out amplification |
RSC ADVANCES
|
| 2014-07 |
Using Confined Self-Adjusting Carbon Nanotube Arrays as High-Sensitivity Displacement Sensing Element |
ACS APPLIED MATERIALS & INTERFACES
|
| 2014-07 |
Development of a flexible three-axis tactile sensor based on screen-printed carbon nanotube-polymer composite |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
| 2014-07 |
Highly sensitive cantilever type chemo-mechanical hydrogen sensor based on contact resistance of self-adjusted carbon nanotube arrays |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2014-06 |
탄소 나노튜브 기반 물리 센서 |
센서 과학과 기술
|
| 2014-05 |
Investigation of Interfacial Adhesion between the Top Ends of Carbon Nanotubes |
ACS APPLIED MATERIALS & INTERFACES
|
| 2014-04 |
A flexible hybrid strain energy harvester using piezoelectric and electrostatic conversion |
SMART MATERIALS AND STRUCTURES
|
| 2014-04 |
Humidity sensing characteristics of focused ion beam-induced suspended single tungsten nanowire |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2014-03 |
마이크로 구동기를 이용한 탄소나노튜브 어레이의 접촉 면적에 따른 점착력 측정 |
정보저장시스템학회 논문집
|
| 2014-03 |
MEMS 구동기를 이용한 마이크로 주사거울의 고유주파수 튜닝 |
정보저장시스템학회 논문집
|