| 2024-05 |
Thermal creep analysis and correlation development for manufactured HT9 cladding |
Journal of Nuclear Materials
|
| 2024-04 |
Reconsideration of the dislocation arrest model for dynamic strain aging in C-bearing high Mn steel with low stacking fault energy |
Materials Science and Engineering: A
|
| 2024-04 |
Effect of phase transformation on the densification of LaYO3 pellet |
International Journal of Refractory Metals and Hard Materials
|
| 2024-03 |
GC250D의 가스분위기 제어질화 공정에서 화합물층의 형성에 따른 표면조도의 변화 |
열처리공학회지
|
| 2024-02 |
Characteristics of oxide films formed on SA106 Gr.B and SA335 P22 in a flowing condition at the microscopic and atomic scales |
Corrosion Science
|
| 2024-02 |
Perturbation of Na-ion distribution for enhancement of ionic conductivity to a practical level of over 1 mS·cm−1 in Na3ZnGaS4 |
Energy Storage Materials
|
| 2024-01 |
Effect of turbulent flow on the oxide properties of carbon steel in alkaline water |
Journal of Materials Research and Technology
|
| 2024-01 |
Influence of Alloying Elements on the Carburizing Behavior in Acetylene Atmosphere |
Metals
|
| 2024-01 |
Effect of precharging methods on the hydrogen embrittlement of 304 stainless steel |
International Journal of Hydrogen Energy
|
| 2024-01 |
Temperature dependency of hydrogen embrittlement resistance of austenitic Fe–24Mn–3Cr-0.5Cu-0.47C steel |
Materials Science and Engineering: A
|
| 2023-11 |
Effect of C on the superplasticity of medium Mn steel |
Journal of Materials Research and Technology
|
| 2023-11 |
진공침탄에 의한 AISI 4115강의 침탄 거동에 미치는 세멘타이트 석출의 영향 |
열처리공학회지
|
| 2023-11 |
A nano-twinned structure and tensile properties of a thermally cycled Fe-17Mn alloy |
Journal of Alloys and Compounds
|
| 2023-10 |
Creep Property and Correlation of Diffusion-Welded Alloy 800H Tubes for Printed Circuit Heat Exchangers and Steam Generators |
Metals and Materials International
|
| 2023-10 |
High-strain rate and low-temperature superplasticity of Fe-Mn-Si-Ni steel |
Journal of Alloys and Compounds
|
| 2023-09 |
Effect of inclusions on the hydrogen embrittlement of martensitic medium-Mn steel |
Journal of Materials Research and Technology
|
| 2023-09 |
Hydrogen absorption and embrittlement of Zn-Al coated medium-Mn steel |
Corrosion Science
|
| 2023-09 |
Inverse PLC behavior of type A serration in Fe–18Mn-0.55C steel |
Journal of Materials Research and Technology
|
| 2023-09 |
Microstructures and intergranular corrosion resistances of hot-rolled austenitic stainless steel clad plates |
Journal of Materials Research and Technology
|
| 2023-09 |
Origin of tearing topography surface in hydrogen-charged pearlitic steel |
Acta Materialia
|
| 2023-08 |
Hydrogen absorption and embrittlement of martensitic medium-Mn steels |
Corrosion Science
|
| 2023-07 |
Influence of Cr Content on the High-Temperature Oxidation Behavior and Mechanism of Low-Alloy Steels |
Materials
|
| 2023-06 |
Effect of d-ferrite in welded ER308 and ER316 microstructure on hydrogen embrittlement |
International Journal of Hydrogen Energy
|
| 2023-05 |
Mechanisms of types B and C serrations in the tensile flow curve of C-bearing high Mn steel |
Journal of Materials Research and Technology
|
| 2023-03 |
EPMA를 이용한 침탄강의 정확하고 신뢰성 있는 탄소농도 측정을 위한 분석조건 최적화 |
Korean Journal of Materials Research
|
| 2023-03 |
증기발생기 전열관용 Alloy 690 소재의 크리프 특성에 미치는 탄화물 형성의 영향 |
Korean Journal of Metals and Materials
|
| 2023-03 |
The mechanism of dislocation multiplication during thermally induced γ ↔ ε transformations in the Fe-17Mn alloy |
Scripta Materialia
|
| 2023-02 |
Cr-Mo 저합금강의 진공침탄 공정 압력 및 질소 첨가 비율에 따른 경화깊이 균일도 및 표면 특성 효과 |
한국표면공학회지
|
| 2023-02 |
Temperature Dependency of Hydrogen Embrittlement in Thermally H-precharged STS 304 Austenitic Stainless Steel |
Metals and Materials International
|
| 2023-02 |
Chemical interaction of Y2O3 coating with U-Zr-Nd metallic fuel during casting
|
Ceramics International
|
| 2023-01 |
펄라이트 조직을 갖는 초고강도 볼트의 수소취성 저항성 |
열처리공학회지
|
| 2022-09 |
Humid air 분위기로부터 대기 압력에 따른 Cr-Mo 저합금강의 고온 산화 거동 |
열처리공학회지
|
| 2022-08 |
Fouling behavior of a printed circuit steam generator under simulated operating conditions of a small modular reactor |
ANNALS OF NUCLEAR ENERGY
|
| 2022-07 |
Fe-10Mn-3.5Si 합금의 초소성에 미치는 반복 냉연 및 소둔의 영향 |
열처리공학회지
|
| 2022-07 |
Ultralow-temperature superplasticity of high strength Fe–10Mn-3.5Si steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2022-05 |
열화된 CrMoV 주조강에 대한 보수 용접 방법 및 후열처리 특성 평가 |
열처리공학회지
|
| 2022-05 |
Design of high strength medium-Mn steel using machine learning |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2022-02 |
Chemical Cleaning of Magnetite Deposits on the Flow Mini-Channels of a Printed Circuit Heat Exchanger in an EDTA-Based Solution |
MATERIALS
|
| 2022-02 |
Micro-axial cracking in unnotched, cold-drawn pearlitic steel wire: Mechanism and beneficial effect on the resistance to hydrogen embrittlement |
ACTA MATERIALIA
|
| 2022-01 |
A novel method based on the Seebeck effect for analyzing the behavior of the PLC band and type A serration |
SCRIPTA MATERIALIA
|
| 2021-11 |
1 톤급 양산형 진공 침탄로에서 아세틸렌 유량과 로 내 위치에 따른 AISI 4115 강의 침탄 거동 |
열처리공학회지
|
| 2021-08 |
Effect of B on the superplasticity of Fe-6.6Mn-2.0Al alloy |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2021-07 |
열간압연으로 제조된 STS 304L/A516-70N과 STS 316L/A516-70N 클래드재들의 미세조직에 대한 비교 연구 |
열처리공학회지
|
| 2021-06 |
Failure analysis of blades and vanes of a compressor for a gas turbine engine |
ENGINEERING FAILURE ANALYSIS
|
| 2021-05 |
Stasis mechanism of γ → ε martensitic transformation in Fe-17Mn alloy |
ACTA MATERIALIA
|
| 2021-04 |
Potential source of carbon contamination in U-Zr melt processed in Y2O3-plasma-spray-coated graphite |
JOURNAL OF NUCLEAR MATERIALS
|
| 2021-03 |
The effect of austenite grain size on deformation mechanism of Fe–17Mn steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2021-03 |
Hydrogen absorption, desorption and embrittlement of Zn and ZnNi-electrodeposited bolts |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
|
| 2021-03 |
The mechanism of dynamic strain aging for type A serrations in tensile curves of a medium-Mn steel |
ACTA MATERIALIA
|
| 2021-01 |
Precipitation strengthening in naturally aged Al-Zn-Mg-Cu alloy |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2021-01 |
Effects of Ti addition on the microstructure and mechanical properties of Al-Zn-Mg-Cu-Zr alloy |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2020-12 |
Crystallographic characterization of Al18Mg3Ti2 intermetallic phase in Al–Zn–Mg–Cu–Zr–Ti alloy |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2020-10 |
Microstructural evolution and tensile properties of Fe-11Mn-10Al-1.2C medium-Mn lightweight steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2020-09 |
AISI 4115 강의 진공 침탄 시 아세틸렌 유량에 따른 침탄 거동 |
KOREAN JOURNAL OF METALS AND MATERIALS
|
| 2020-09 |
A Simple Mathematical Model for Establishing Isothermal Transformation Kinetics from Continuous Cooling Data |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2020-07 |
Mechanical property change and precipitate evolution during long-term aging of 1.25Cr-0.5Mo steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2020-06 |
Evaluations of tensile properties as a function of austenitizing temperature and springback by V-bending testing in medium-Mn steels |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2020-05 |
Mechanism for H-shaped precipitate formation in 1.25Cr-0.5Mo steel |
MATERIALS CHARACTERIZATION
|
| 2020-05 |
Effect of the magnetic transition of austenite phase on austenite-to-epsilon martensitic transformation in FeMn binary alloys |
MATERIALS CHARACTERIZATION
|
| 2020-04 |
Grain boundary sliding during high-temperature tensile deformation in superplastic Fe-6.6Mn-2.3Al steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2020-04 |
The mechanism of dynamic strain aging for type A serrations in tensile flow curves of Fe-18Mn-0.55C (wt.%) twinning-induced plasticity steel |
ACTA MATERIALIA
|
| 2020-04 |
Effects of Mo concentration on recrystallization texture, deformation mechanism and mechanical properties of Ti–Mo binary alloys |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2020-03 |
The effect of ultrasonic melt treatment on solid solution treatment temperature and/or time for an Al-7Si-2Cu-1Mg alloy |
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
|
| 2020-03 |
소둔로에서 수욕으로 이송 중 발생한 표면 산화가 TWIP 강의 미세조직과 인장 성질에 미치는 영향 |
열처리공학회지
|
| 2020-03 |
The Effects of Process Temperatures on the Microstructure and Tensile Properties of Warm-Stamped Nb-Bearing Medium-Mn Steel |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2020-01 |
The mechanism of mechanical twinning near grain boundaries in twinning-induced plasticity steel |
SCRIPTA MATERIALIA
|
| 2019-11 |
Quantitative approach to realization of ultrasonic grain refinement of Al-7Si-2Cu-1Mg alloy |
SCIENTIFIC REPORTS
|
| 2019-10 |
Effect of auto-tempering on the cold roll-ability of medium-Mn steel |
MATERIALS SCIENCE AND TECHNOLOGY
|
| 2019-10 |
Self-healing behavior of Inconel 617B superalloy |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2019-08 |
Residual lifetime assessment of cold-reheater pipe in coal-fired power plant through accelerated degradation test |
RELIABILITY ENGINEERING & SYSTEM SAFETY
|
| 2019-06 |
Effects of lamellar structure on tensile properties and resistance to hydrogen embrittlement of pearlitic steel |
ACTA MATERIALIA
|
| 2019-06 |
Effect of Tempering on the Microstructure and Tensile Properties of a Martensitic Medium-Mn Lightweight Steel |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2019-04 |
Anisotropic Mechanical Behavior of Additive Manufactured AISI 316L Steel |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2019-03 |
Electrically Conducting and Mechanically Strong Graphene–Polylactic Acid Composites for 3D Printing |
ACS APPLIED MATERIALS & INTERFACES
|
| 2019-03 |
Combined Effects of Ultrasonic Melt Treatment and Cu/Mg Solute on the Microstructure and Mechanical Properties of a Hypoeutectic Al-7Si Alloy |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2019-03 |
The effect of Zn-Al coating on the hydrogen embrittlement of twinning-induced plasticity steels with and without Al |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2019-01 |
Influence of Gas Nitriding on the Damping Capacity of Fe-17Mn Alloy |
METALS AND MATERIALS INTERNATIONAL
|
| 2018-11 |
Effect of Deformation Twinning in Metastable β-Type Ti-15Mo Alloys |
JOM
|
| 2018-11 |
Microstructure-Strengthening Interrelationship of an Ultrasonically Treated Hypereutectic Al–Si (A390) Alloy |
METALS AND MATERIALS INTERNATIONAL
|
| 2018-07 |
Effect of Grain Misorientation Angle on Twinning Propagation in Ti–15Mo Alloy |
METALS AND MATERIALS INTERNATIONAL
|
| 2018-05 |
오스테나이트계 스테인리스강에서의 자가치유 연구 동향 |
재료마당
|
| 2018-05 |
Relationship between texture development and deformation twinning activity in Ti-15Mo alloy |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2018-02 |
Tensile properties and deformation mode of Si-added Fe-18Mn-0.6C steels |
ACTA MATERIALIA
|
| 2017-12 |
Internal Friction of Austenitic Fe-Mn-C-Al Alloys |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2017-12 |
Design for Fe-high Mn alloy with an improved combination of strength and ductility |
SCIENTIFIC REPORTS
|
| 2017-12 |
Superplasticity in a lean Fe-Mn-Al steel |
NATURE COMMUNICATIONS
|
| 2017-10 |
Effect of the initial grain size and orientation on the formation of deformation twins in Ti-15Mo alloy |
JOURNAL OF MATERIALS SCIENCE
|
| 2017-07 |
Mechanism for Z-phase formation in 11CrMoVNbN martensitic heat-resistant steel |
MATERIALS CHARACTERIZATION
|
| 2017-06 |
Post-uniform elongation and tensile fracture mechanisms of Fe-18Mn-0.6C-xAl twinning-induced plasticity steel |
ACTA MATERIALIA
|
| 2017-04 |
Overview of hydrogen embrittlement in high-Mn steels |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
|
| 2017-01 |
Separate Evaluation of the Kinetics of Carbide Precipitation Occurring at the Interface of Preexisting Particles and Within the Austenitic Matrix in a Microalloyed Steel |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2017-01 |
The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel |
ACTA MATERIALIA
|
| 2016-10 |
Fabrication of bimodal-grained Al-free medium Mn steel by double intercritical annealing and its tensile properties |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2016-09 |
다이캐스팅 공정에 사용된 개량형 STD61 열간 금형 표면의 미세조직에 관한 연구 |
KOREAN JOURNAL OF METALS AND MATERIALS
|
| 2016-08 |
Inhomogeneity of microstructure and damping capacity of a FC25 disc-brake rotor and their interrelationship |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2016-08 |
The cause of premature tensile fracture of gas-nitrocarburized steel |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2016-07 |
The Effects of Austenitizing Conditions on the Microstructure and Wear Resistance of a Centrifugally Cast High-Speed Steel Roll |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2016-07 |
The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel |
ACTA MATERIALIA
|